View Single Post
  #5 (permalink)  
Old 03-04-2011, 04:35
hilogirl_96720's Avatar
hilogirl_96720 hilogirl_96720 is offline
Senior Member
Join Date: Jan 2010
Location: Hawaii
Posts: 1,770
Default Re: Throwing Out ET Lite - Loving My Resin Drops!

Originally Posted by sxybunnyg View Post
What aroud the edges? Ive heard that some lift all around and they have to go around with something else I have never use any kind but would like to try them.
I used the Xyron to affix the image to the cap, put the resin drop on, covered it with a plastic sheet (used the one that was covering the drops) then used a soft cloth and firmly buffed the drop to make sure it was good and stuck. I checked them this morning and they're still nice and tight, no lifting. I think the secret is to really rub them on well - this got rid of the little air pockets too. The other drops I've used did have a little bit of an issue with lifting within the first 24 hours, nothing major though. I'll check them again when I get home and will report back
Reply With Quote