View Single Post
  #36 (permalink)  
Old 02-16-2011, 01:52
ah4185's Avatar
ah4185 ah4185 is offline
Senior Member
Join Date: Nov 2008
Posts: 2,848
Default Re: Bottle cap experts I need ur help!

Originally Posted by micmac68 View Post
I did it!! I did it!!! I did it!!!! I purchased some images from Etsy, printed them out on my ink-jet printer, sprayed some clear sealer (from WalMart) over the images, used my 1" circle hole punch to punch out the images and the thermo-web, attached the image to the cap with the thermo web, then mixed up my ET Lite, and poured them on my caps. I am THRILLED with the results!!!

I have not had luck with using the E6000 glue to secure my bottlecap to my bows. I put the furniture pads in the back for added adhesion area, but the caps kept pulling off. Any suggestions with what I am doing wrong? I have been using hot glue and they are holding for me. TIA
YEAH for you!!

Make sure the seals are out of your caps. Sometimes that makes them come loose. Also, you can use spare buttons from around the house on the inside ~ they are cheaper and you probably have some laying around. If you don't, they have bags of little round wood disks at Michaels that you can use. They are much cheaper.
Reply With Quote