View Single Post
  #15 (permalink)  
Old 02-10-2011, 12:34
Maxine's Avatar
Maxine Maxine is offline
Senior Member
Join Date: Sep 2010
Location: Florida
Posts: 4,595
Default Re: Resins on clippies.. what's your method?

Originally Posted by sewsewdiane View Post
i hot glue the ribbon to the clip. i dont really like using double sided tape.

i have read that the tape needs to dry on there so it wont come off. i know i have had some clips become really "cured " after a few days. make sense?
I did let the tape cure (it was about 72 hours later when I checked them) and the resin still pulled away from it

Originally Posted by kksand View Post
Try using a combo of the tape and glue. I like the tape because it is neater, but have had problems with it pulling away over time with heavier embellishments such as resins or flowers. I use the glue/tape combo with E6000 - have not had issues since started that method.
Originally Posted by davang1027 View Post
I do a ds tape/ hot glue combo. Still looks neat with the tape but I put a little hot glue in a few spots that have come loose in the past without it.
Originally Posted by devilicious View Post
I use the tape and hot glue on my clips. I put the resins on with hot glue.
Originally Posted by patnoel View Post
I use hot glue for both and have never had a problem.

Thanks so much girls I'm going to try a tape/hot glue combo and see if I get better results
Reply With Quote