View Single Post
  #12 (permalink)  
Old 10-13-2010, 01:33
Maxine's Avatar
Maxine Maxine is offline
Senior Member
Join Date: Sep 2010
Location: Florida
Posts: 4,595
Default Re: How to add fabric loops and marabou please?

Originally Posted by marylading View Post
If you are using the girlythingsbows instructions,
After the 6th step where you wrap the wire around (I usually use thread and a needle), at this point you will add some extra's. You cut your piece of ribbon twice the size of the loops. Fold it in half and put it in next v side down. Wrap it with the wire or use your thread and needle. You really need to go up through the middle of the ribbon or it will slip. Add at least 3 or 4 pieces side by side across the barrette, then move on to the next step with another loop of ribbon. Keep repeating these steps adding extras between each of the loops until you get to the end of the barrette. When you're done cut some of your loops so you have more spikes. Hopefully, that explains it better.
Mary, you are so sweet to take time to explain this to me. I'm going to show my hubby your post and together we'll see if we can make it work. I probably won't get a chance to try it out until this weekend, but... if the bow I make comes out somewhat decent, I'll post a pic for you

Again, (((hugs))) for being so sweet and helpful
Reply With Quote