Here are the instructions for my little bunnies:
First, gather your materials. For one bunny you will need:
2 inches of 7/8" white grosgrain ribbon (I used pink in the instruction pictures, out of white!)
3 1/2 inches of 3/8" white grosgrain ribbon
3 1/2 inches of 3/8" white grosgrain ribbon
3 inches of 3/8" white grosgrain ribbon
3 inches of 3/8" white grosgrain ribbon
1 1/2 inches of 3/8" patterned grosgrain ribbon
1 inch of 1/8" white grosgrain ribbon
2 small googly eyes
1 small pink pom pom
sissors
hot glue and glue gun
fray check (or heat seal)
1. First, seal all edges of the ribbon.
2. Next, using the 2 inch piece of 7/8" ribbon, fold down bottom and top two edges to form a diamond shape, shown below.
The front should look like this: (This is the bunny's face)
3. Now, using your pieces of white and pink 3/8" ribbon, glue ends together to form ears, and attach the pink ovals on top of the white ovals, as pictured.
4. Attach both ears to the back of the face.
5. Next, glue on the googly eyes and pom pom nose.
6. Now, fold your patterend 3/8" ribbon into a tiny bow-tie style bow. Finish it by placing the 1/8" inch of white ribbon around the center and glue to hold in place. Now glue the bow to the bunny's head and you're done!
Hoppy Easter! Let me know if you have any questions!