View Single Post
  #7 (permalink)  
Old 04-15-2009, 10:46
inkitup's Avatar
inkitup inkitup is offline
Senior Member
 
Join Date: Apr 2008
Posts: 391
Default Re: Clippies with Sealah tape

I use 1/4 tape. I just cut the ribbon the length I need to line the clippie (4.5 inches), then put the tape on the ribbon aqnd remove the backing. I have really thin, long nails so I can get in between there easier, but sometimes it can be a little difficult. I find that if I press the tape on to the ribbon a little bit, it sticks a little better and I have an easier time getting the backing off. I prefer this method over the hot glue. With the hot glue you have to be quick because it can dry quickly. HTH.
__________________
Christine

SAHM to Madisyn (6) and Kynzie (2)
Reply With Quote