View Single Post
  #22 (permalink)  
Old 10-02-2008, 08:10
reed4fun reed4fun is offline
Junior Member
Join Date: Jun 2008
Posts: 2
Smile Re: Cutting Korkers With Wood Burner?

I also cut mine with a woodburner. I measure, flatten out the ribbon a little, use a metal rule as a straight edge and cut on a piece of glass. My woodburner came with different tips and I use the one that is pointed. It is a very narrow cone - pointed like a thicker pencil tip and it does a great job. I keep the tip as upright as possible and I just draw it through the ribbon pressing against the metal ruler. I hope this helps.
Reply With Quote