Thread: bottlecap
View Single Post
  #7 (permalink)  
Old 07-06-2008, 06:47
noisycrickets noisycrickets is offline
Member
 
Join Date: May 2008
Posts: 80
Default Re: bottlecap

Quote:
Originally Posted by creativekiddos View Post
You might be using to much. Start at the sides and swirl around until you get to the center. Then I swirl the cap itself a little just to make sure the sealant is even on the top. Then I don't even touch the cap until the next day.
I agreed - you may be using a bit too much. Envirotec is a little runny. I use slightly different method. I start at the center - using a small paint brush, make a small puddle and work my way outward toward the edges. My success rate is about 80% - not perfect everytime.
Reply With Quote