| | Re: That little center bow that isn't really a surround bow
Photo 4 - Here is photo 2 again. However, instead of placing the horizontal part of the ribbon the way you would for a twisted bow, you need to flip it upside down. So the lower edge of that horizontal part needs to be upper edge. You move the lower edge up towards the upper loops so the dots end up against the table. If you flip it down the other way, you will get a different look to the loops.
Photo 5 - This is how you want it to look. If you compare it to #2, you will see the loops are different and having one printed side should help you see the difference.